Rafiqul I. Noorani

Search results

• 2024

  An Expert System for the Selection of Additive Manufacturing Systems

  Abdulwahab, A. S. & Noorani, R. I., Aug 4 2024, 8th International Conference on Innovation in Artificial Intelligence, ICIAI 2024. Association for Computing Machinery, p. 178-186 9 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2023

  Development of a Facial Recognition Pantograph Drawing Robot

  Giles, D., Glenn, P., Burnell, T., Flynn, S. & Noorani, R., 2023, 2023 3rd International Conference on Robotics, Electrical and Signal Processing Techniques, ICREST 2023. Institute of Electrical and Electronics Engineers Inc., p. 62-67 6 p. (International Conference on Robotics, Electrical and Signal Processing Techniques; vol. 2023-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental Procedures

  Aladwani, F., Sun, X., Es-Said, O., Noorani, R., Ebrahim, M., Melmed, W., Avchen, B., Trumpp, S., Lee, N. & Aliya, D., 2023, SpringerBriefs in Applied Sciences and Technology. Springer Science and Business Media Deutschland GmbH, p. 7-10 4 p. (SpringerBriefs in Applied Sciences and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Introduction

  Aladwani, F., Sun, X., Es-Said, O., Noorani, R., Ebrahim, M., Melmed, W., Avchen, B., Trumpp, S., Lee, N. & Aliya, D., 2023, In: SpringerBriefs in Applied Sciences and Technology. p. 1-5 5 p.

  Research output: Contribution to journal › Editorial › peer-review

• Results and Discussions

  Aladwani, F., Sun, X., Es-Said, O., Noorani, R., Ebrahim, M., Melmed, W., Avchen, B., Trumpp, S., Lee, N. & Aliya, D., 2023, SpringerBriefs in Applied Sciences and Technology. Springer Science and Business Media Deutschland GmbH, p. 11-45 35 p. (SpringerBriefs in Applied Sciences and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Summary

  Aladwani, F., Sun, X., Es-Said, O., Noorani, R., Ebrahim, M., Melmed, W., Avchen, B., Trumpp, S., Lee, N. & Aliya, D., 2023, SpringerBriefs in Applied Sciences and Technology. Springer Science and Business Media Deutschland GmbH, p. 47-48 2 p. (SpringerBriefs in Applied Sciences and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• 2022

  ADDITIVE MANUFACTURING: VAT POLYMERIZATION FOR MEDICAL APPLICATIONS: Vat polymerization uses ultraviolet light to harden liquid photosensitive resins into medical products such as surgical models and artificial limbs

  Kanematsu, H., Barry, D. M., Noorani, R. & McGrath, P., Oct 2022, In: Advanced Materials and Processes. 180, 7, p. 17-20 4 p.

  Research output: Contribution to journal › Comment/debate › peer-review

• Additive Manufacturing Vat Polymerization for Medical Applications

  Kanematsu, H., Barry, D. M., Noorani, R. & McGrath, P., Oct 2022, In: Advanced Materials and Processes. 180, 7, p. 17-20 4 p.

  Research output: Contribution to journal › Article › peer-review

• 2020

  Comparative evaluation of carbon reinforced polyetherketone acetabular cup using finite element analysis

  Abdal, A., Noorani, R. & Cha, G., Dec 2020, In: Journal of Biomedical Physics and Engineering. 10, 6, p. 761-770 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Effects of process parameter variation on the surface roughness of polylactic acid (PLA) materials using design of experiments (DOE)

  Burke, C., Dalal, A., Abukhalaf, A. & Noorani, R., Aug 5 2020, In: IOP Conference Series: Materials Science and Engineering. 897, 1, 012003.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
• 2019

  Design and Manufacturing of a 3D Printer for Teaching and Research

  Noorani, R., Lynch, M., Hodgkiss, P., Fumo, M. & Burke, C., 2019, In: IOP Conference Series: Materials Science and Engineering. 652, 1, 12058.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Design of a Multi Sensor-Based Low-Cost Educational Robot

  Robot, E., Aldousari, E., Alfadhli, M., Alanzi, A., Qasem, M. & Noorani, R., 2019, 1st International Conference on Robotics, Electrical and Signal Processing Techniques, ICREST 2019. Institute of Electrical and Electronics Engineers Inc., p. 668-670 3 p. 8644448. (1st International Conference on Robotics, Electrical and Signal Processing Techniques, ICREST 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of A drone's payload delivery capabilities utilizing rotational movement

  Burke, C., Nguyen, H., Magilligan, M. & Noorani, R., Jan 2019, 1st International Conference on Robotics, Electrical and Signal Processing Techniques, ICREST 2019. Institute of Electrical and Electronics Engineers Inc., p. 672-675 4 p. 8644318. (1st International Conference on Robotics, Electrical and Signal Processing Techniques, ICREST 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2017

  3D printing: Technology, applications, and selection

  Noorani, R., Jan 1 2017, CRC Press. 271 p.

  Research output: Book/Report › Book
• 2016

  The recreation and evaluation of a human hand using low-cost reverse engineering and 3D printing systems

  Jacobsen, C., Ashe, E. & Noorani, R., 2016, Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 14).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2014

  The recreation of a human face using a low-cost reverse engineering system

  Jacobsen, C., Dominguez, A. & Noorani, R., Nov 14 2014, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2007

  A nanotechnology course for undergraduates

  Mendelson, M., Saniei, N., Noorani, R., Kuleck, G. & Ula, N., 2007, In: International Journal of Engineering Education. 23, 5, p. 960-972 13 p.

  Research output: Contribution to journal › Article › peer-review

• Improvement of surface roughness on ABS 400 polymer materials using Design of Experiments (DOE)

  Horvath, D., Noorani, R. & Mendelson, M., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. Trans Tech Publications Ltd, p. 2389-2392 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2005

  Comparative analysis of different methods of rapid tooling

  Martin, C., Sasutil, J. V., Kouhkan, M., Lorea, E. & Noorani, R., 2005, In: Materials Science Forum. 475-479, IV, p. 2873-2876 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Computer-aided design and optimization of an aluminum track bracket

  Renolayan, A., Taqi, S. & Noorani, R., Apr 2005, In: WSEAS Transactions on Computers. 4, 4, p. 400-403 4 p.

  Research output: Contribution to journal › Article › peer-review
• 2004

  Effects of process variables on the surface finish of rapid prototyped samples

  Flores, N., Cassabona, J., Mendelson, M., Noorani, R. & Ioi, T., 2004, p. 1-9. 9 p.

  Research output: Contribution to conference › Paper › peer-review

• Teaching and evaluating a new nanotechnology undergraduate course

  Mendelson, M., Kuleck, G., Sanny, J., Bulman, J., Roe, J., Ula, N., Noorani, R. & Stupar, J., 2004, In: ASEE Annual Conference Proceedings. p. 13421-13428 8 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2000

  Data acquisition system for an undergraduate fin heat exchanger experiment

  Hinton, M. A., Marloth, R. & Noorani, R. I., 2000, In: ASEE Annual Conference Proceedings. p. 1701-1713 13 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of layer orientation on mechanical properties of rapid prototyped samples

  Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R. & Pregger, B. A., 2000, In: Materials and Manufacturing Processes. 15, 1, p. 107-122 16 p.

  Research output: Contribution to journal › Article › peer-review
• 1999

  Calculation of Shrinkage Compensation Factors for Rapid Prototyping (FDM 1650)

  Dao, Q., Frimodig, J. C., Le, H. N., Li, X. Z., Putnam, S. B., Golda, K., Foyos, J., Noorani, R. & Fritz, B., 1999, In: Computer Applications in Engineering Education. 7, 3, p. 186-195 10 p.

  Research output: Contribution to journal › Article › peer-review

• Form sheet metal with RP tooling

  Fritz, B. & Noorani, R., 1999, Advanced Materials and Processes, 155, 4, p. 37-39 3 p.

  Research output: Contribution to specialist publication › Article

• Impact of new technologies on integrated product development

  Noorani, R., Es-Said, O., Foyos, J., Barrata, A. & Fritz, B., 1999, In: ASEE Annual Conference Proceedings. p. 2675-2682 8 p.

  Research output: Contribution to journal › Conference article › peer-review
• 1996

  Study of design optimization through advanced general element analysis

  Noorani, R. I., 1996, p. 41-47. 7 p.

  Research output: Contribution to conference › Paper › peer-review
• 1995

  Mini baja off-road vehicle design and optimization using finite element analysis

  Gjessing, A. M. & Noorani, R. I. I., 1995, 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention; 7th International Conference on Design Theory and Methodology; JSME Symposium on Design and Production; Mechanical Design Education and History; Computer-Integrated Concurrent Design Conference. American Society of Mechanical Engineers (ASME), p. 39-42 4 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1990

  Microcomputer-based robot arm control

  Noorani, R. I., 1990, In: Mathematical and Computer Modelling. 14, C, p. 450-455 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 1989

  Real-time temperature control using a microcomputer

  Noorani, R. I. & Foley, L., 1989, p. 571-575. 5 p.

  Research output: Contribution to conference › Paper › peer-review
• 1987

  COMPUTER-AIDED DESIGN OF A COMPOUND GEAR TRAIN.

  Smith, S. A., Noorani, R. I. & Ghazavi, A., May 1987, In: CIME. Computers in mechanical engineering. 5, 6, p. 53-58 6 p.

  Research output: Contribution to journal › Article › peer-review

• MICROPROCESSOR-BASED DESIGN OF A HEATING AND COOLING SYSTEM.

  Noorani, R. I., 1987, p. 205-209. 5 p.

  Research output: Contribution to conference › Paper › peer-review
• 1986

  Effects of electric fields on the flame propagation velocity of methane-air flame

  Noorani, R. I. & Holmes, R. E., Jan 1986, In: AIAA Journal. 24, 1, p. 190-192 3 p.

  Research output: Contribution to journal › Article › peer-review
• 1985

  Effects of electric fields on the blowoff limits of a methane-air flame

  Noorani, R. I. & Holmes, R. E., Sep 1985, In: AIAA Journal. 23, 9, p. 1452-1454 3 p.

  Research output: Contribution to journal › Article › peer-review

• NUMERICAL STUDY OF PRESSURE TRANSIENTS.

  Noorani, R. I. & Haque, M. Z., 1985, p. 24-26. 3 p.

  Research output: Contribution to conference › Paper › peer-review