Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing

W. Miranda; G. Takiguchi; T. Shimabukuro; L. McLennan; C. Agajanian; L. Quintero; D. Mismar; J. Abdulla; C. Andrews; M. Hahn; E. Fodran; E. W. Lee; H. Garmestani; R. D. Conner; D. Brick; J. Ogren; Omar S. Es-Said

Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing

W. Miranda
, G. Takiguchi
, T. Shimabukuro
, L. McLennan
, C. Agajanian
, L. Quintero
, D. Mismar
, J. Abdulla
, C. Andrews
, M. Hahn
, E. Fodran
, E. W. Lee
, H. Garmestani
, R. D. Conner
, D. Brick
, J. Ogren
, Omar S. Es-Said

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

Various thermo-mechanical processes were performed on a standard and a low oxygen content Ti-6Al-4V alloy. Testing was performed to determine whether it was possible to achieve a combination of tensile properties comparable to those of Ti-3Al-2.5V by means of cold working and annealing Ti-6Al-4V from a thickness of 0.671 cm (0.264 in.) to that between 0.081 and 0.094 cm (0.032-0.037 in.), which had never been carried out before. The resulting mechanical properties of this study were compared to the mechanical properties of Ti-3Al-2.5V to determine whether Ti-6Al-4V could be used as a suitable replacement for hydraulic tubing applications. The optimum results were achieved with 10-15% cold work and annealing at 750 A degrees C (1382 A degrees F) for 2 h between cold work reductions in thickness. It was concluded that Ti-6Al-4V was a suitable replacement for Ti-3Al-2.5V for hydraulic tubing with an increase in ultimate and yield strengths, but with a slight sacrifice of 5-10% elongation.

Original language	American English
Pages (from-to)	1206-1218
Journal	Journal of Materials Engineering and Performance
Volume	20
Issue number	7
State	Published - Oct 2011

Disciplines

Mechanical Engineering

Access to Document

https://digitalcommons.lmu.edu/mech_fac/18

Cite this

Miranda, W., Takiguchi, G., Shimabukuro, T., McLennan, L., Agajanian, C., Quintero, L., Mismar, D., Abdulla, J., Andrews, C., Hahn, M., Fodran, E., Lee, E. W., Garmestani, H., Conner, R. D., Brick, D., Ogren, J., & Es-Said, O. S. (2011). Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing. Journal of Materials Engineering and Performance, 20(7), 1206-1218. https://digitalcommons.lmu.edu/mech_fac/18

Miranda, W, Takiguchi, G, Shimabukuro, T, McLennan, L, Agajanian, C, Quintero, L, Mismar, D, Abdulla, J, Andrews, C, Hahn, M, Fodran, E, Lee, EW, Garmestani, H, Conner, RD, Brick, D, Ogren, J & Es-Said, OS 2011, 'Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing', Journal of Materials Engineering and Performance, vol. 20, no. 7, pp. 1206-1218. <https://digitalcommons.lmu.edu/mech_fac/18>

@article{68c775742e71471ea687bef5c464e98f,

title = "Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing",

abstract = " Various thermo-mechanical processes were performed on a standard and a low oxygen content Ti-6Al-4V alloy. Testing was performed to determine whether it was possible to achieve a combination of tensile properties comparable to those of Ti-3Al-2.5V by means of cold working and annealing Ti-6Al-4V from a thickness of 0.671 cm (0.264 in.) to that between 0.081 and 0.094 cm (0.032-0.037 in.), which had never been carried out before. The resulting mechanical properties of this study were compared to the mechanical properties of Ti-3Al-2.5V to determine whether Ti-6Al-4V could be used as a suitable replacement for hydraulic tubing applications. The optimum results were achieved with 10-15\% cold work and annealing at 750 A degrees C (1382 A degrees F) for 2 h between cold work reductions in thickness. It was concluded that Ti-6Al-4V was a suitable replacement for Ti-3Al-2.5V for hydraulic tubing with an increase in ultimate and yield strengths, but with a slight sacrifice of 5-10\% elongation.",

author = "W. Miranda and G. Takiguchi and T. Shimabukuro and L. McLennan and C. Agajanian and L. Quintero and D. Mismar and J. Abdulla and C. Andrews and M. Hahn and E. Fodran and Lee, \{E. W.\} and H. Garmestani and Conner, \{R. D.\} and D. Brick and J. Ogren and Es-Said, \{Omar S.\}",

note = "pMiranda, W., Takiguchi, G., Shimabukuro, T., McLennan, L., Agajanian, C., Quintero, L., Mismar, D., Abdulla, J., Andrews, C., Hahn, M., Fodran, E., Lee, E.W., Garmestani, H., Conner, R.D., Brick, D., Ogren, J., and Es-Said, O. S., 2011, {"}Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing,{"} Journal of Materials Engineering and Performance, strong20/strong(7), pp. 1206-1218./p",

year = "2011",

month = oct,

language = "American English",

volume = "20",

pages = "1206--1218",

journal = "Journal of Materials Engineering and Performance",

issn = "1544-1024",

publisher = "Springer",

number = "7",

}

TY - JOUR

T1 - Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing

AU - Miranda, W.

AU - Takiguchi, G.

AU - Shimabukuro, T.

AU - McLennan, L.

AU - Agajanian, C.

AU - Quintero, L.

AU - Mismar, D.

AU - Abdulla, J.

AU - Andrews, C.

AU - Hahn, M.

AU - Fodran, E.

AU - Lee, E. W.

AU - Garmestani, H.

AU - Conner, R. D.

AU - Brick, D.

AU - Ogren, J.

AU - Es-Said, Omar S.

N1 - pMiranda, W., Takiguchi, G., Shimabukuro, T., McLennan, L., Agajanian, C., Quintero, L., Mismar, D., Abdulla, J., Andrews, C., Hahn, M., Fodran, E., Lee, E.W., Garmestani, H., Conner, R.D., Brick, D., Ogren, J., and Es-Said, O. S., 2011, "Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing," Journal of Materials Engineering and Performance, strong20/strong(7), pp. 1206-1218./p

PY - 2011/10

Y1 - 2011/10

N2 - Various thermo-mechanical processes were performed on a standard and a low oxygen content Ti-6Al-4V alloy. Testing was performed to determine whether it was possible to achieve a combination of tensile properties comparable to those of Ti-3Al-2.5V by means of cold working and annealing Ti-6Al-4V from a thickness of 0.671 cm (0.264 in.) to that between 0.081 and 0.094 cm (0.032-0.037 in.), which had never been carried out before. The resulting mechanical properties of this study were compared to the mechanical properties of Ti-3Al-2.5V to determine whether Ti-6Al-4V could be used as a suitable replacement for hydraulic tubing applications. The optimum results were achieved with 10-15% cold work and annealing at 750 A degrees C (1382 A degrees F) for 2 h between cold work reductions in thickness. It was concluded that Ti-6Al-4V was a suitable replacement for Ti-3Al-2.5V for hydraulic tubing with an increase in ultimate and yield strengths, but with a slight sacrifice of 5-10% elongation.

AB - Various thermo-mechanical processes were performed on a standard and a low oxygen content Ti-6Al-4V alloy. Testing was performed to determine whether it was possible to achieve a combination of tensile properties comparable to those of Ti-3Al-2.5V by means of cold working and annealing Ti-6Al-4V from a thickness of 0.671 cm (0.264 in.) to that between 0.081 and 0.094 cm (0.032-0.037 in.), which had never been carried out before. The resulting mechanical properties of this study were compared to the mechanical properties of Ti-3Al-2.5V to determine whether Ti-6Al-4V could be used as a suitable replacement for hydraulic tubing applications. The optimum results were achieved with 10-15% cold work and annealing at 750 A degrees C (1382 A degrees F) for 2 h between cold work reductions in thickness. It was concluded that Ti-6Al-4V was a suitable replacement for Ti-3Al-2.5V for hydraulic tubing with an increase in ultimate and yield strengths, but with a slight sacrifice of 5-10% elongation.

M3 - Article

SN - 1544-1024

VL - 20

SP - 1206

EP - 1218

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

IS - 7

ER -